Skip to main content

Gazelle SA-341 SA-342 workshop




Gazelle SA-342 in the process of manufacturing to be as good as new


The process of overhauling is at the stage where SA-342 gets new paint after the old one is removed completely.The new wiring is placed.That all guarantees long and safe flight hours.

Comments

Popular posts from this blog

Gazelle Turbomeca Astazou III B engine complete insight

The complete insight of Turbomeca Astazou III B engine



Gazelle SA 341 SA 342 Torquemeter

The torquemeter is an unique instrument but so common at the helicopters.As the word say it measures the torque.Torque between main rotor and engine.It is one of the most important instruments.So here it is at the  test board attached . Then checking the zero point with the test device,it seems ok so far.

There you see the fixed zero point ad device prior the testing.                                                                                                                                                                                                                                       From the both sides of torque indicator there are holes where you can adjust the tolerance at 0% and 100%.




In case of using older version of device there are some tolerances to be inputed so this is the nearly fair good readings of maximum torque at SA 342.
This is the reading at 50%
How to connect the cables to Gazelle instalation.

This is the device itself fairly packed after testing.

At this…